|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor Rev. 02 -- 22 November 2009 Product data sheet 1. Product profile 1.1 General description PNP low VCEsat transistor in a SOT363 (SC-88) plastic package. 1.2 Features SOT363 package Low collector-emitter saturation voltage VCEsat High collector current capability IC and ICM High efficiency leading to less heat generation 1.3 Applications Major application segments: Automotive 42 V power Telecom infrastructure Industrial Peripheral driver: Driver in low supply voltage applications (e.g. lamps and LEDs) Inductive load driver (e.g. relays, buzzers and motors) DC-to-DC converter 1.4 Quick reference data Table 1. Symbol VCEO IC ICM RCEsat Quick reference data Parameter collector-emitter voltage collector current (DC) peak collector current equivalent on-resistance Conditions Min Typ Max -100 -1 -3 320 Unit V A A m NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 2. Pinning information Table 2. Pin 1, 2, 5, 6 3 4 Discrete pinning Description collector base emitter 1 2 3 6 5 4 3 4 sym030 Simplified outline Symbol 1, 2, 5, 6 3. Ordering information Table 3. Ordering information Package Name PBSS9110Y Description plastic surface mounted package; 6 leads Version SOT363 Type number 4. Marking Table 4. Marking Marking code 91*[1] Type number PBSS9110Y [1] * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 2 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO ICM IC IB Ptot Parameter collector-base voltage collector-emitter voltage emitter-base voltage peak collector current collector current (DC) base current (DC) total power dissipation Tamb 25 C [1] [2] [3] Conditions open emitter open base open collector Tj(max) Min - Max -120 -100 -5 -3 -1 -0.3 290 480 625 Unit V V V A A A mW mW mW C C C Tj Tamb Tstg [1] [2] [3] junction temperature operating ambient temperature storage temperature -65 -65 150 +150 +150 Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, standard footprint. Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, 1cm2 collector mounting pad. Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, 6cm2 collector mounting pad. 600 Ptot (mW) (1) 001aaa796 400 (2) 200 0 0 40 80 120 160 Tamb (C) (1) 1cm2 collector mounting pad (2) Standard footprint Fig 1. Power derating curves PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 3 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 6. Thermal characteristics Table 6. Symbol Rth(j-a) Thermal characteristics Parameter Conditions [1] [2] [3] Typ 431 260 200 85 Unit K/W K/W K/W K/W thermal resistance from junction to ambient in free air Rth(j-s) thermal resistance from junction to soldering in free air [1] [1] [2] [3] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, standard footprint Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, 1cm2 collector mounting pad. Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, 6cm2 collector mounting pad. 103 Zth (K/W) 102 (1) (2) (3) (4) (5) (6) (7) 001aaa798 10 (8) (9) (10) 1 10-1 10-5 10-4 10-3 10-2 10-1 1 10 102 tp (s) 103 Mounted on FR4 PCB; standard footprint (1) = 1 (2) = 0.75 (3) = 0.5 (4) = 0.33 (5) = 0.2 (6) = 0.1 (7) = 0.05 (8) = 0.02 (9) = 0.01 (10) = 0 Fig 2. Transient thermal impedance as a function of pulse time; typical values PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 4 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 103 Zth (K/W) 102 (1) (2) (3) (4) (5) (6) 001aaa797 10 (7) (8) (9) 1 (10) 10-1 10-5 10-4 10-3 10-2 10-1 1 10 102 tp (s) 103 Mounted on FR4 PCB; mounting pad for collector = 1cm2 (1) = 1 (2) = 0.75 (3) = 0.5 (4) = 0.33 (5) = 0.2 (6) = 0.1 (7) = 0.05 (8) = 0.02 (9) = 0.01 (10) = 0 Fig 3. Transient thermal impedance as a function of pulse time; typical values PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 5 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 7. Characteristics Table 7. Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO Parameter collector-base cut-off current collector-emitter cut-off current emitter-base cut-off current DC current gain Conditions VCB = -80 V; IE = 0 A VCB = -80 V; IE = 0 A; Tj = 150 C VCE = -80 V; VBE = 0 V VEB = -4 V; IC = 0 A VCE = -5 V; IC = -1 mA VCE = -5 V; IC = -250 mA VCE = -5 V; IC = -0.5 A VCE = -5 V; IC = -1 A VCEsat collector-emitter saturation voltage IC = -250 mA; IB = -25 mA IC = -500 mA; IB = -50 mA IC = -1 A; IB = -100 mA RCEsat VBEsat VBEon fT Cc equivalent on-resistance base-emitter saturation voltage base-emitter turn-on voltage transition frequency collector capacitance Pulse test: tp 300 s; 0.02. [1] [1] Min 150 150 150 125 [1] Typ 170 - Max -100 -50 -100 -100 450 -120 -180 -320 320 -1.1 -1.0 17 Unit nA A nA nA ICES IEBO hFE mV mV mV m V V MHz pF IC = -1 A; IB = -100 mA IC = -1 A; IB = -100 mA IC = -1 A; VCE = -5 V IC = -50 mA; VCE = -10 V; f = 100 MHz IE = Ie = 0 A; VCB = -10 V; f = 1 MHz 100 - [1] PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 6 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 600 hFE (1) 001aaa376 -1.2 VBE (V) -0.8 (1) 001aaa377 400 (2) (2) (3) 200 (3) -0.4 0 -10-1 -1 -10 -102 -103 -104 IC (mA) 0 -10-1 -1 -10 -102 -103 -104 IC (mA) VCE = -10 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C VCE = -10 V (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C Fig 4. DC current gain as a function of collector current; typical values -1 001aaa378 Fig 5. Base-emitter voltage as a function of collector current; typical values -1 001aaa380 VCEsat (V) VCEsat (V) -10-1 -10-1 (1) (2) (1) (2) (3) -10-2 -10-1 -1 -10 -102 -103 -104 IC (mA) -10-2 -10-1 -1 -10 -102 -103 -104 IC (mA) IC/IB = 10 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C Tamb = 25 C (1) IC/IB = 50 (2) IC/IB = 20 Fig 6. Collector-emitter saturation voltage as a function of collector current; typical values Fig 7. Collector-emitter saturation voltage as a function of collector current; typical values PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 7 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor -10 001aaa381 -10 001aaa379 VBEsat (V) VBEsat (V) -1 (1) (2) (3) -1 -10-1 -10-1 -1 -10 -102 -103 -104 IC (mA) -10-1 -10-1 -1 -10 -102 -103 -104 IC (mA) IC/IB = 10 (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C IC/IB = 20 Tamb = 25 C Fig 8. Base-emitter saturation voltage as a function of collector current; typical values 001aaa382 Fig 9. Base-emitter saturation voltage as a function of collector current; typical values 001aaa383 103 RCEsat () 102 103 RCEsat () 102 10 (1) (2) 10 (1) 1 (3) 1 (2) 10-1 -10-1 -1 -10 -102 -103 -104 IC (mA) 10-1 -10-1 -1 -10 -102 -103 -104 IC (mA) IC/IB = 10 (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C Tamb = 25 C (1) IC/IB = 50 (2) IC/IB = 20 Fig 10. Equivalent on-resistance as a function of collector current; typical values Fig 11. Equivalent on-resistance as a function of collector current; typical values PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 8 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor IB (mA) = -45 IC -40.5 (A) -36 -1.6 -31.5 -27 -1.2 -2 001aaa384 -0.8 -0.4 -22.5 -18 -13.5 -9 -4.5 0 0 -1 -2 -3 -4 VCE (V) -5 Fig 12. Collector current as a function of collector-emitter voltage; typical values PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 9 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 8. Package outline Plastic surface-mounted package; 6 leads SOT363 D B E A X y HE vMA 6 5 4 Q pin 1 index A A1 1 e1 e 2 bp 3 wM B detail X Lp c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.30 0.20 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 w 0.2 y 0.1 OUTLINE VERSION SOT363 REFERENCES IEC JEDEC JEITA SC-88 EUROPEAN PROJECTION ISSUE DATE 04-11-08 06-03-16 Fig 13. Package outline PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 10 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 9. Revision history Table 8. Revision history Release date 20091122 Data sheet status Product data Change notice Supersedes PBSS9110Y_1 Document ID PBSS9110Y_2 Modifications: * * * * * * This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content. Table 2 "Discrete pinning": amended Figure 10 "Equivalent on-resistance as a function of collector current; typical values": updated Figure 11 "Equivalent on-resistance as a function of collector current; typical values": updated Figure 12 "Collector current as a function of collector-emitter voltage; typical values": updated Figure 13 "Package outline": updated Product data - PBSS9110Y_1 20040609 PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 11 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 10. Legal information 10.1 Data sheet status Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 10.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 10.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental 10.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PBSS9110Y_2 (c) NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 -- 22 November 2009 12 of 13 NXP Semiconductors PBSS9110Y 100 V, 1 A PNP low VCEsat (BISS) transistor 12. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 10.1 10.2 10.3 10.4 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact information. . . . . . . . . . . . . . . . . . . . . 12 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 22 November 2009 Document identifier: PBSS9110Y_2 |
Price & Availability of PBSS9110Y |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |